Skip to Content

Iron On Spider Web Art with Free SVG

Bring on the spooky with this DIY spider web art using an embroidery hoop and a spider web design in iron-on vinyl with this free SVG cutting file.

completed spider web art styled with green adn black accessories

Easy Spider Web Hoop Art

Ok so it’s not exactly what you would call spooky but we do love how this spider web art turned out! Using an embroidery hoop we had lying around from our cross-stitching days, the spider web design was cut out in an iron-on vinyl using our Cricut Maker and then heat applied with an EasyPress 2.

completed spider web art inside an embroidery hoop

For more spider web art, head over to this post and grab the free printable watercolor spider web. We used the same watercolored spider web to make these resin pendants for Halloween. And if you like the way it looks on a throw pillow or phone case, check out our Society6 shop.

And for some spooky chuckles, check out these frightfully fun Halloween riddles!

Materials Needed

Disclosure: This post contains affiliate links for your shopping convenience. Should you choose to purchase through them, we will make a small commission at no extra cost to you. You can read our full disclosure policy here.

Materials needed to make an iron on spider web art hoop ring.

How to Make Iron-On Spider Web Art:

Pre-work:

With a pencil, trace the outside of the embroidery hoop on the fabric. 

Tracing the fabric around the embroidery hoop.

Leave about 2” around the pencil line and cut out a circle shape.

Cutting the fabric with the traced outline.

Preparing the Image:

Open Cricut Design Space and then click on the “+” sign to start a new project, opening up a blank canvas.

Opening the Cricut Design Space computer program.

Click on the Upload button from the toolbar to insert the Spiderweb SVG file onto the canvas.

Maintain the size at 10.125” across or adjust by highlighting the image and clicking on the size box in the top toolbar. 

Uploading a spider SVG file onto Cricut Design Space.

Cutting the Iron-On Vinyl:

Select “Make It” in the upper right corner to proceed with cutting.

Selecting the "make it" option in Cricut Design Space.

Click the “Mirror” toggle button to on as this is necessary for ALL iron-on vinyl cuts.

Clicking the "mirror" toggle button in Cricut Design Space.

Choose Everyday Iron-On Vinyl from the list of options in the drop down menu.

Place the Iron-On vinyl directly onto the standard grip mat with the SHINY SIDE DOWN.

Placing black vinyl on a grip mat.

Following the instructions prompted on the screen, cut out the Iron-On vinyl.

Cricut machine cutting the black vinyl.

Preparing the Cut Image:

Remove the Everyday Iron-On Vinyl from the mat. 

Removing the black vinyl from the mat.

Using a pair of scissors, cut around the vinyl image and put the left over vinyl aside for another project.

Peeling away excess black vinyl from the cut image.

Using a weeding tool, peel away the excess vinyl leaving only the spider web image.

Using a weeding tool to cut excess black vinyl from the cut image.

Applying the Image with the Cricut EasyPress 2:

To start, set the temperature and time on the machine following the recommended provided by the EasyPress Interactive Quick Reference Guide.  In our case, we set the EasyPress 2 to 315F for 100% cotton fabric.

Preheat the fabric (the cut circle shape) for 5 seconds to get rid of any wrinkles.

Preheating the fabric with the Cricut EasyPress 2 machine.

Place the cut image on the fabric with the shiny side up, centering it in the middle.

Placing the spider web cut image onto the fabric.

Press the image on to the fabric for 30 seconds with light pressure. If the entire image doesn’t fit under the EasyPress, then move the EasyPress over and heat press the image a second time. 

Turn the fabric upside down and apply heat for another 15 seconds with light pressure.

Turning the fabric upside down on the EasyPress mat.

Peel the plastic part of the vinyl off carefully once it cools down and discard the plastic portion. 

Peeling away plastic layer of vinyl on top of the cut spider web image.

Tip: Make sure you do not place an iron or the EasyPress directly over the vinyl without the protective plastic cover.

Assembling the Hoop Art

Insert the fabric into the embroidery hoop and after centering, tighten the screw at the top of the hoop.

Trim away the excess fabric and tuck the fabric behind the embroidery hoop. Hang to enjoy this Halloween! 

More DIY Halloween Crafts

Can’t get enough crafting for Halloween? We’ve got you covered with these fun (and non-spooky) project ideas:

Like it? Pin it for later!

Spider web embroidery hoop art with text overlay and an in-process image showing how to iron on the spider web art.

Iron On Spider Web Art with Free SVG

Jane and Sonja
Create your own unique spider web art using an embroidery hoop and a spider web design in iron-on vinyl with this free SVG cutting file.
5 from 1 vote

Materials
  

Instructions
 

Pre-work:

  • With a pencil, trace the outside of the embroidery hoop on the fabric.

Preparing the Image:

  • Click on the Upload button from the toolbar to insert the Spider Web SVG file onto the canvas.
  • Maintain the size at 10.125” across or adjust by highlighting the image and clicking on the size box in the top toolbar.

Cutting the Iron-On Vinyl:

  • Select “Make It” in the upper right corner to proceed with cutting.
  • Click the “Mirror” toggle button to on.
  • Cut the Everyday Iron-On Vinyl width to fit on the standard grip mat. Press continue.
  • Choose Everyday Iron-On Vinyl from the list of options in the drop down menu.
  • Place the Iron-On vinyl directly onto the standard grip mat with the SHINY SIDE DOWN.
  • Following the instructions prompted on the screen, cut out the vinyl.

Preparing the Cut Image:

  • Using a weeding tool, peel away the excess vinyl leaving only the spider web image.

Applying the Image with the Cricut EasyPress 2:

  • Position the mat or a towel on a flat surface.
  • Set the temperature and time on the machine.
  • Preheat the fabric (the cut circle shape) for 5 seconds.
  • Place the cut image on the fabric with the shiny side up.
  • Press the image on to the fabric for 30 seconds with light pressure.
  • Turn the fabric upside down and apply heat for another 15 seconds.
  • Peel the plastic part of the vinyl off carefully once it cools and discard.

Assembling the Hoop Art

  • Insert the fabric into the embroidery hoop, after centering so that all vinyl edges are sandwiched inside the hoop, tighten the screw.
  • Trim away the excess fabric and hang to enjoy!
Keyword cricut, diy, Halloween
Like this craft? Leave some stars!& mention @SustainMyCraftHabit or tag #sustainmycrafthabit on Instagram!
Tutorial Rating




This site uses Akismet to reduce spam. Learn how your comment data is processed.

This site uses Akismet to reduce spam. Learn how your comment data is processed.