| | | |

Fabric Envelope Sewing Pattern

Today Amy is sharing a free Fabric Envelope Sewing pattern with all of you! This project is a perfect DIY gift for Valentine’s Day. You can change the fabric colors and embellishments and use the pattern to create gifts for other holidays as well!

gray and pink fabric envelope on gray carpet

Why wrap a gift in paper when you could wrap it in a handmade fabric envelope? Perfect for Valentine’s Day present or any other special occasion.

gray and pink fabric envelope on gray carpet

You can decorate the front with lots of different designs, using a variety of hand or machine sewing techniques. Let your imagination run wild! 

gray fabric envelope on white table

How to Get the Heart Pattern Piece

The envelope pattern piece for this project is self-drafted, you can find the directions below. If you’d like the template for the heart on the project, just fill out the form and we will send it to you.

gray fabric envelope on white table with chocolates
gray fabric envelope on white table

Project Instructions

gray and pink fabric envelope on gray carpet

Fabric Envelope Sewing Pattern

Amy Ball
Why wrap a gift in paper when you could wrap it in a handmade fabric envelope! Perfect for Valentine’s Day or any other special occasion.
5 from 3 votes
Prep Time 15 minutes
Active Time 1 hour 30 minutes
Total Time 1 hour 45 minutes

supplies

  • 1 Fat Eighth Main fabric if you are using directional fabric, you will need a Fat Quarter instead of a Fat Eighth
  • 1 Fat Eighth Lining Fabric if you are using directional fabric, you will need a Fat Quarter instead of a Fat Eighth
  • 1 piece Lightweight Interfacing; 9" x 17 1/2" I used Pellon Shape-Flex
  • 2-3 Fabric Scraps For Applique
  • 1 Button
  • 1 Heart Template Download in our Templates Library

Instructions
 

Step 1: Cut out Fabric

  • Using the diagram as a guide, cut out one piece from the main fabric and one piece from the lining fabric.

    Remember if you are using directional fabric you’ll need to cut out the shape so the point is at the top.
    cutting layout diagram

Step 2: Cut Interfacing

  • Use one of the fabric pieces as a template and cut out the interfacing.
    Then trim ¼” off all the edges to make it slightly smaller. Secure the interfacing to the wrong side of the main fabric piece (following the instructions for the interfacing you are using).
    There should be a ¼” border all around the main fabric piece without interfacing.

Step 3: Create Applique

  • Cut out the appliqué pieces; one heart (using the template) and a 1½” square “stamp”.
    cut out red heart

Step 4: Mark Fold Lines

  • Using the diagram as a guide, mark fold lines onto the right side of the main fabric piece (I’d recommend using a Hera marker, or press the lines).
    folding diagram

Step 5: Add the Appliques

  • Now it’s time to add the appliqué designs. You can machine and/or hand sew any embellishments you would like.
    Make sure to add them onto the middle third of the main fabric piece, within the fold lines from step four.

    I have added:

  • – machine appliqué heart; raw edge with a decorative stitch from my sewing machine
    red heart and hand stitching on gray fabric
  • 
- machine appliqué stamp: trim with pinking shears then straight stitch
    red heart and hand stitching on gray fabric
  • 
- hand quilting and back stitch details


    Appliqué tip: use fabric glue to hold your appliqué fabric in place, this saves having to remove pins as you sew!
    gray fabric envelope on white table

Step 6: Assemble

  • Pin the main fabric and lining fabric pieces, right sides together. Then sew around the edges with a ¼” seam allowance, leaving a turning gap of about 4” along the bottom edge.
    fabric inside out
  • Clip all the corners before turning the envelope the right way out. Gently poke out the corners and press.
    fabric envelope sewn before assembly
  • Topstitch round all the sides, ⅛” from the edge. Be sure to catch all the layers from the turning hole to seal it closed.
  • Add a buttonhole near the point on the angled edge. Make sure it is not too close to the topstitching.
    closeup of top stitching
  • Re-press the fold lines that were marked in step four.
  • Clip or pin the two shorter sides of the rectangle together and sew. These two lines of stitching will go over the top of the original topstitching.
    envelope in progress, sides clipped with binding clips
  • Press the final side down into placed mark the position of the button. Hand sew the button in place.
    hand holding envelope flap open
  • [Note: if you don’t want to add a buttonhole (I know they aren’t everybody’s favourite thing!), at step six, before you sew, put a loop of ribbon between the fabric layers, either side of the point on the angled edge with the raw edges of the ribbon lined up to the fabric raw edges.]

Now it’s time to fill your envelope with gifts and love!
    diagram of button loop
PRINT
Love this tutorial? Get the behind the scenes on Instagram
gray fabric envelope on white table

About the Designer

Amy lives in the north of England with her husband and son. When she’s not sewing and quilting, Amy can usually be found baking or reading. You can find her on Instagram @amyatthegate

https://coffeeandmaking.co.uk/seams-perfect-launch/

Seams Perfect (a new digital course!)

Press Perfection – Top pressing tools

Guide to (near) Perfect Patchwork

You May Also Like:

Busy Day Tablet Case Pattern

Valentine Felt Envelope Pattern

Quilted Potholder Pattern

gray and pink fabric envelope on gray carpet


Similar Posts