Skip to Content

DIY Galaxy Resin Bracelet

Hi friends! Sharing the how-to for making your own out-of-this world galaxy-inspired resin bracelet for a space-lover in your life.

Wearing a galaxy resin bracelet.

Making Resin Bracelets

Prior to us crafting with resin, I always wondered how those interesting, colorful and unique pieces of resin jewelry were made. Now that we’ve been resin crafting for several years, it’s finally clear to us. We’ve made several resin jewelry pieces such as jewelry pendants with pressed flowers, these glitter-filled resin jewelry for the holidays, resin pendants with lavender and these beach-themed jewelry pendants.

This is however, the first time we’ve made resin bracelets and we couldn’t be happier with the results. Choosing the right mold is the first place to start.

Where to Buy Resin Bracelet Molds?

Materials Needed to make Galaxy Resin Bracelets:

Disclosure: This post contains affiliate links for your shopping convenience. Should you choose to purchase through them, we will make a small commission at no extra cost to you. You can read our full disclosure policy here.

Materials needed to make a galaxy inspired resin bracelet.

How to Make Resin Bracelets:

Be sure to read all the instructions on the package before starting. Work in a well-ventilated area. Always wear gloves and protect your working surface.

Preparing the Resin

Begin by mixing together equal parts of resin and hardener in a small measuring cup and stir consistently for two minutes.

Next, transfer the mixture into a second measuring cup and continue stirring for an additional minute.

Pouring the mixed resin into a second cup.

Divide the mixed resin into four separate cups.

Dividing the mixed resin into four measuring cups.

Next, add a few drops of black, purple, blue glitter or silver glitter paint. Stir each completely with separate stir sticks.

Adding paint and glitter to each resin cup.

Pouring the Resin

Start with one of the colors such as black and add a little bit to different areas of the bracelet mold. Make sure to leave some areas without any black resin.

Pouring some black resin into a silicone bracelet mold.

Take a second resin color such as the clear glitter resin and fill in some of the other areas of the bracelet mold. Continue randomly pouring bits of the different colors of resin to get a layered and swirly effect.

Adding some purple resin with the black resin in the bracelet mold.

Continue until the mold is filled. Consider sprinkling bit of clear glitter in a couple areas of the mold.

Filling the silicone bracelet mold with resin and adding glitter.

After about 15 to 20 minutes blow off any air bubbles that have risen to the top of the mold. Use either a small kitchen torch or your breath through a straw for this.

Make sure that the bracelet is on a level surface and cover to prevent any dust from settling in. Let the resin cure overnight.

The bracelet mold filled to the top with resin and glitter.

Remove the bracelet from the mold and enjoy! It’s the perfect accessory for my space-loving teen.

Wearing a finished galaxy resin bracelet.

This craft originally appeared in Resin Crafts Blog project gallery.

Close up of the galaxy inspired resin bracelet.

Creative DIY Jewelry Display Ideas

For creative jewelry display ideas using resin, check out our rustic glam organizer; faux marble resin jewelry display and elegant memento box. And for some non-resin display ideas, check out this DIY boho driftwood organizer and this personalized scrap wood accessory organizer.

Like it? Pin it for later!

Close up of the galaxy inspired resin bracelet with text overlay.
close up image of a galaxy inspired resin bracelet

DIY Galaxy Resin Bracelet

Jane and Sonja
Create an out-of-this world, galaxy-inspired resin bracelet with this step by step tutorial.
5 from 2 votes

Materials
  

  • EnvirotexLite Jewelry Resin
  • Acrylic paints black, purple and DecoArt Milky Way Blue Galaxy Glitter
  • Fine silver glitter
  • Silicone bracelet mold
  • Measuring cups wooden stir sticks, gloves and paper towels
  • Kitchen torch or straw

Instructions
 

  • Begin by mixing together equal parts of Resin and Hardener in a small measuring cup. Stir completely for two minutes.
  • Transfer the mixture into a second measuring cup and continue stirring for an additional minute.
  • Divide the mixed resin into four separate cups.
  • Into each cup drop a few drops of black, purple, blue glitter or silver glitter paint. Stir each completely with separate stir sticks.
  • Start with one of the colors such as black and add a little bit to different areas of the bracelet mold. Make sure to leave some areas without any black resin.
  • Take a second resin color such as the clear glitter resin and fill in some of the other areas of the bracelet mold. Continue randomly pouring bits of the different colors of resin to get a layered and swirly effect.
  • Continue until the mold is filled. Consider sprinkling bit of clear glitter in a couple areas of the mold.
  • After about 15 to 20 minutes blow off any air bubbles that have risen to the top of the mold.
  • Let the resin cure overnight.
  • Remove the bracelet from the mold and enjoy.
Like this craft? Leave some stars!& mention @SustainMyCraftHabit or tag #sustainmycrafthabit on Instagram!
Tutorial Rating




This site uses Akismet to reduce spam. Learn how your comment data is processed.

This site uses Akismet to reduce spam. Learn how your comment data is processed.